Utilize este identificador para referenciar este registo: http://hdl.handle.net/10400.9/2676
Título: Production of drinking water using a multi-barrier approach integrating nanofiltration: a pilot scale study
Autor: Lopes, Mafalda T. P.
Matos, Cristina T.
Pereira, Vanessa J.
Benoliel, Maria J.
Valério, Maria Ermelinda
Bucha, Luís B.
Rodrigues, Alexandre
Penetra, Ana I.
Ferreira, Elisabete
Cardoso, Vitor
Reis, Maria A. M.
Crespo, João G.
Palavras-chave: Water quality
Water treatment
UV photolysis
Fouling analysis
Data: 2013
Editora: Elsevier
Citação: Lopes, M.P.; Matos, C.T.; Pereira, V.J. [et.al.]. - Production of drinking water using a multi-barrier approach integrating nanofiltration: a pilot scale study. In: Separation and Purification Technology, 2013, Vol. 119, p. 112-122
Resumo: A multi-barrier system was studied for the production of drinking water with high chemical and microbiological quality. The integration of nanofiltration (NF) and ultraviolet (UV) photolysis was tested at pilot scale in a surface water treatment plant. The NF membranes tested, Desal DK and NF270, allow for the production of permeates with high quality standards, although the membrane with higher molecular weight cut-off (NF270) revealed to be the best option for surface water treatment due to its higher permeability. The NF270 membrane was also efficient to deliver high quality water, even under high pollutant concentrations, making possible to operate with water recovery rates as high as 98%. Extensive studies were performed in the water treatment plant where the proposed system was tested at three locations of the drinking water production line. Seeking to achieve the best compromise between high recovery rate, high retention of chemicals and microorganisms as well as preventing operational problems (flux decline and fouling), it was found that the integrated system should be placed after the conventional sand filtration, operating at a 91% recovery rate. Under the selected conditions – TMP of 8 bar and recovery rate of 91% – it is possible to operate at constant permeability without flux decline for a period of 15 days, after which a gentle CIP procedure is recommended. Membrane fouling was also investigated and the major foulant classes identified were proteins, polysaccharides and humic acids. A cleaning protocol was also tested and the impact of each cleaning step on the recovery of permeability evaluated.
URI: http://hdl.handle.net/10400.9/2676
ISSN: 1383-5866
Versão do Editor: http://dx.doi.org/10.1016/j.seppur.2013.09.002
Aparece nas colecções:UB - Artigos em revistas internacionais

Ficheiros deste registo:
Ficheiro Descrição TamanhoFormato 
SeparationPurificationTechnology_Vol.119_112.pdf224,82 kBAdobe PDFVer/Abrir

FacebookTwitterDeliciousLinkedInDiggGoogle BookmarksMySpace
Formato BibTex MendeleyEndnote Degois 

Todos os registos no repositório estão protegidos por leis de copyright, com todos os direitos reservados.