Loading...
2 results
Search Results
Now showing 1 - 2 of 2
- Hydrothermal liquefaction of biomass produced from domestic sewage treatment in high-rate pondsPublication . De Aguiar Do Couto, Eduardo; Pinto, Filomena; Varela, Francisco; Reis, Alberto; Costa, Paula; Calijuri, Maria LuciaABSTRACT: This study evaluates the application of biomass produced from the treatment of domestic sewage in high-rate ponds (HRPs) as feedstock for the production of bio-oil via hydrothermal liquefaction (HTL). The effects of reaction time, temperature, and biomass/water ratio on the yield of bio-oil were assessed. In addition, a balance of carbon and nitrogen among the products (bio-oil, aqueous phase, solid residue, and gas) was carried out, in order to evaluate the quality of the bio-oil and possibilities for increasing value from the byproducts. In a 15-min operation at 300 degrees C with biomass/water ratio of 1/10 (w.w(-1)), the bio-oil yield was of 44.4% (Dry Ash Free - daf-basis). Under every condition tested, the solid residue was the most abundant byproduct, mostly due to the high ash content in the biomass. The minimum nitrogen recovery in the bio-oil was 57%, obtained in the operation at 275 degrees C, which is considered the main disadvantage of the process. The use of biomass directly after its production may result in an excessive consumption of energy due to the high water content. However, the need for drying is reduced when compared to other microalgal-based bioenergy production processes, potentially achieving a positive energy balance in the HTL.
- Municipal and industrial wastewater blending: Effect of the carbon/ nitrogen ratio on microalgae productivity and biocompound accumulationPublication . Pereira, Alexia Saleme Aona de Paula; Magalhães, Iara; Silva, Thiago; Reis, Alberto; de Aguiar do Couto, Eduardo; Calijuri, Maria LuciaABSTRACT: Municipal wastewater (MW) and industrial wastewater from juice processing (IWJ) were blended in different proportions to assess the effect of the carbon/nitrogen (C/N) ratio on pollutant removal, microalgal biomass (MB) cultivation, and the accumulation of carotenoids and biocompounds. MB development was not observed in treatments with higher C/N ratios (>30.67). The wastewater mixture favored the removal of dissolved organic carbon (75.61 and 81.90%) and soluble chemical oxygen demand (66.78-88.85%), compared to the treatment composed exclusively of MW (T7). Treatments T3 and T6 (C/N ratio equal to 30.67 and 7.52, respectively) showed higher Chlorophyll-a concentrations, 1.47 and 1.54 times higher than T7 (C/N ratio 1.75). It was also observed that the C/N ratio of 30.67 favored the accumulation of carbohydrates and lipids (30.07% and 26.39%, respectively), while the C/N ratio of 7.52 improved protein accumulation (33.00%). The fatty acids C16:0, C18:1, C18:2, and C18:3 had the highest concentrations. Additionally, increasing the C/N ratio can be an efficient strategy to improve the production of fatty acids for biofuels, mainly due to the increased concentration of shorter-chain fatty acids (C16:0). These findings suggest that blending wastewater not only enhances treatment performance but also increases the accumulation of valuable carbohydrates and lipids in MB, and optimizes fatty acid production for biofuel applications. This research represents significant progress towards feasibility of using MB produced from wastewater.