Loading...
3 results
Search Results
Now showing 1 - 3 of 3
- Banhos de anodização contendo aditivos sustentáveis utilizados para proteção contra corrosão na liga AA2024-T3Publication . Proença, Carla Sofia; Serrano, B.; Cabral, A. M.; Correia, J. P.; Araujo, Maria EduardaRESUMO: A liga de alumínio 2024-T3 é uma das ligas mais utilizadas na indústria aeronáutica devido às suas boas propriedades mecânicas. No entanto, devido à presença de partículas intermetálicas de cobre na sua matriz, esta liga é muito suscetível à corrosão. O presente trabalho teve como principal objetivo avaliar a capacidade de inibição da corrosão, de camadas de conversão eletroquímica obtidas com banhos de anodização e posteriormente seladas. Os banhos continham aditivos orgânicos de origem natural. Foram estudados os aditivos orgânicos sorbitol (SSA) e xilitol (XSA), e feita uma comparação com os filmes obtidos no banho de anodização em que foi utilizado o ácido tartárico (TSA). A resistência à corrosão das amostras tratadas foi monitorizada por ensaios de espectroscopia de impedância eletroquímica. Recorreu-se à técnica de voltametria cíclica para obter informação sobre o mecanismo de inibição de cada um dos aditivos envolvidos neste estudo. Para determinar as possíveis interações químicas entre os aditivos com capacidade inibidora utilizados e o substrato, recorreu-se à técnica de Espectroscopia no Infravermelho por Transformada de Fourier (FTIR). A morfologia das amostras tratadas com estes compostos foi avaliada por microscopia eletrónica de varrimento acoplada com Espectroscopia de Energia Dispersiva de Raios-X.
- Mineralization of olive mill wastewater over DSAPublication . Gonçalves, M. R.; Correia, J. P.; Marques, Isabel PaulaBioenergy recovery from olive mill wastewater (OMW) has been effectively accomplished by anaerobic digestion [1]. Nevertheless, a post treatment is required to attain the discharge limit values. After the anaerobic treatment of OMW, the main issues are related to the remaining organic matter (COD), recalcitrant phenolic compounds (40-50%) and effluent dark-brown colour. The electrochemical treatment is proposed in this work as a final step to mineralise the OMW non-biodegradable fraction. The electrochemical oxidation of OMW anaerobically digested was investigated over DSAs. The performance of RuO2 and IrO2 based DSAs was studied by cyclic voltammetry and bulk electrolysis. The experiments were carried out with alkaline samples from the anaerobic reactor comprising 1 to 10 g COD/L, depending to the digester operational conditions. KNO3 was used as electrolyte, alternatively to the preferred NaCl [2], to avoid obtaining an effluent with higher toxicity than the initial one. It was found that RuO2 based anode was significantly more efficient than IrO2, mainly for the COD removal (Figure 1). With an electrolysis charge of Q=1517 C it was obtained COD removals of 9 and 52%, phenols removals of 72 and 98% and colour removal of 61 and 98%, for IrO2 and RuO2 type DSAs, respectively. The exclusion of the centrifugation/filtration step before the electrochemical treatment was considered, since the anaerobic treatment step reduces considerably the solids fraction. It is concluded that the electrochemical oxidation over DSAs is a suitable second step treatment for OMW disposal after the recovery of its energetic potential. The outcome energy from biogas production can balance or reduce the costs of the electrochemical treatment.
- Olive mill wastewater conversion into a stream for agricultural application: anaerobic and electrochemical processesPublication . Sampaio, M. A.; La Cara, F.; Correia, J. P.; Marques, Isabel PaulaAnaerobic digestion and the electrochemical oxidation were used to valorise the effluent of the olive oil production (olive mill wastewater, OMW). Anaerobiosis was realized in an anerobic hybrid reactor, operating at a low hydraulic retention time of about 6 days and digesting the raw OMW, without any previous substrate altarations. Electrochemical process worked with a dimensionally stable anode (DSA), without adding further support electrolytes, at low potential values and at moderate dulution factor of the substrate.