Loading...
3 results
Search Results
Now showing 1 - 3 of 3
- The effects of tantalum addition on the microtexture and mechanical behaviour of tungsten for ITER applicationsPublication . Tejado, Elena; Carvalho, Patricia Almeida; Munoz, A.; Dias, Marta; Correia, J.B.; Mardolcar, U. V.; Pastor, Jose YgnacioTungsten (W) and its alloys are very promising materials for producing plasma-facing components (PFCs) in the fusion power reactors of the near future, even as a structural part in them. However, whereas the properties of pure tungsten are suitable for a PFC, its structural applications are still limited due to its low toughness, ductile to brittle transition temperature and recrystallization behaviour. Therefore, many efforts have been made to improve its performance by alloying tungsten with other elements. Hence, in this investigation, the thermo-mechanical performance of two new tungsten-tantalum materials has been evaluated. Materials with W–5wt.%Ta and W–15wt.%Ta were processed by mechanical alloying (MA) and later consolidation by hot isostatic pressing (HIP), with distinct settings for each composition. Thus, it was possible to determine the relationship between the microstructure and the addition of Ta with the macroscopic mechanical properties. These were measured by means of hardness, flexural strength and fracture toughness, in the temperature range of 300–1473 K. The microstructure and the fracture surfaces features of the tested materials were analysed by Field Emission Scanning Electron Microscopy (FESEM).
- Consolidation of W–Ta composites: hot isostatic pressing and spark and pulse plasma sinteringPublication . Dias, Marta; Guerreiro, F.; Correia, J.B.; Galatanu, Andrei; Rosinski, M.; Monge, M. A.; Munoz, A.; Alves, E.; Almeida Carvalho, PatriciaComposites consisting of tantalum fiber/powder dispersed in a nanostructured W matrix have been consolidated by spark and pulse plasma sintering as well as by hot isostatic pressing. The microstructural observations revealed that the tungsten–tantalum fiber composites consolidated by hot isostatic pressing and pulse plasma sintering presented a continuous layer of Ta2O5 phase at the W/Ta interfaces, while the samples consolidated by spark plasma sintering evidenced a Ta + Ta2O5 eutectic mixture due to the higher temperature of this consolidation process. Similar results have been obtained for the tungsten–tantalum powder composites. A (W, Ta) solid solution was detected around the prior nanostructured W particles in tungsten–tantalum powder composites consolidated by spark and pulse plasma sintering. Higher densifications were obtained for composites consolidated by hot isostatic pressing and pulse plasma sintering.
- Effects of helium and deuterium irradiation on SPS sintered W–Ta composites at different temperaturesPublication . Mateus, R.; Dias, Marta; Lopes, J.; Rocha, J.; Catarino, N.; Franco, N.; Livramento, Vanessa; Almeida Carvalho, Patricia; Correia, J.B.; Hanada, K.; Alves, E.Energetic He+ and D+ ions were implanted into different W–Ta composites in order to investigate their stability under helium and deuterium irradiation. The results were compared with morphological and chemical modifications arising from exposure of pure W and Ta. Special attention was given to tantalum hydride (Ta2H)formation due to its implications for tritium inventory. Three W–Ta composites with 10 and 20 at.% Ta were prepared from elemental W powder and Ta fibre or powder through low-energy ball milling in argon atmosphere. Spark plasma sintering (SPS) was used as the consolidation process in the temperature range from 1473 to 1873 K. The results obtained from pure elemental samples and composites are similar. However, Ta2H is easily formed in pure Ta by using a pre-implantation stage of He+, whereas in W–Ta composites the same reaction is clearly reduced, and it can be inhibited by controlling the sintering temperature.