Repository logo
 
Publication

WC-Cu thermal barriers for fusion applications

2018Journal article Open access
Simple item page
dc.contributor.authorDias, Marta
dc.contributor.authorGuerreiro, F.
dc.contributor.authorTejado, Elena
dc.contributor.authorCorreia, J.B.
dc.contributor.authorMardolcar, U. V.
dc.contributor.authorCoelho, M.
dc.contributor.authorPalacios, T.
dc.contributor.authorPastor, Jose Ygnacio
dc.contributor.authorCarvalho, Patricia Almeida
dc.contributor.authorAlves, E.
dc.date.accessioned2018-10-09T10:11:14Z
dc.date.available2018-10-09T10:11:14Z
dc.date.issued2018
dc.description.abstractABSTRACT: WC-Cu cermets have been devised for thermal barriers between the plasma facing tungsten tiles and the copperbased heat sink in the first wall of nuclear fusion reactors. Composite materials with 50 and 75 v/v% WC have been prepared by hot pressing at 1333 and 1423 K with pressures of 37 and 47 MPa, respectively. Microstructural changes have been investigated by scanning electron microscopy coupled with energy dispersive X-ray spectroscopy and X-ray diffraction. The materials consolidated have also been evaluated in terms of Archimedes' density, thermal diffusivity, Vickers hardness and elastic modulus. Implantation was carried out at room temperature with Ar+ at 100 keV ion beam with a fluence of 4 · 1020 at/m2. The materials consisted of homogeneous dispersions of WC particles in a Cu matrix and presented densifications of about 90%. Incipient swelling in copper-rich regions have been observed on the implanted surfaces, however no significant changes have been detected by X-ray diffraction. Higher WC content in the cermet materials increased hardness and the elastic modulus. The cermets' thermal diffusivity was significantly lower than that of pure copper or tungsten, as desirable for a thermal barrier.pt_PT
dc.description.versioninfo:eu-repo/semantics/acceptedVersionpt_PT
dc.identifier.citationDias, M.; Guerreiro, F.; Tejado, E...[et.al.]. - WC-Cu thermal barriers for fusion applications. In: Surface & Coatings Technology, 2018, 5 p. [article in press]pt_PT
dc.identifier.issn0257-8972
dc.identifier.urihttp://hdl.handle.net/10400.9/3074
dc.language.isoengpt_PT
dc.peerreviewedyespt_PT
dc.publisherElsevierpt_PT
dc.relationPEST-OE/ CTM-UI0084/2011pt_PT
dc.relationIRRADIATION STUDIES OF TUNGSTEN BASED MATERIALS FOR FUSION APPLICATIONS
dc.relation.publisherversionhttps://doi.org/10.1016/j.surfcoat.2018.02.086pt_PT
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/pt_PT
dc.subjectMechanical propertiespt_PT
dc.subjectTungstenpt_PT
dc.subjectThermal propertiespt_PT
dc.subjectHeat treatmentpt_PT
dc.subjectX-ray diffractionpt_PT
dc.titleWC-Cu thermal barriers for fusion applicationspt_PT
dc.typejournal article
dspace.entity.typePublication
oaire.awardTitleIRRADIATION STUDIES OF TUNGSTEN BASED MATERIALS FOR FUSION APPLICATIONS
oaire.awardURIinfo:eu-repo/grantAgreement/FCT/3599-PPCDT/PTDC%2FCTM%2F100163%2F2008/PT
oaire.awardURIinfo:eu-repo/grantAgreement/FCT//SFRH%2FBPD%2F68663%2F2010/PT
oaire.citation.titleSurface and Coatings Technologypt_PT
oaire.fundingStream3599-PPCDT
person.familyNameDias
person.familyNameTejado
person.familyNameCorreia
person.familyNamePastor
person.familyNamecarvalho
person.familyNameAlves
person.givenNameMarta
person.givenNameElena
person.givenNameJose B.
person.givenNameJose Ygnacio
person.givenNamepatricia
person.givenNameEduardo
person.identifier.ciencia-id0E13-5F70-9D8A
person.identifier.ciencia-idC31C-D617-6377
person.identifier.ciencia-id021E-97A3-F128
person.identifier.ciencia-id7911-8653-3CF4
person.identifier.orcid0000-0001-6797-7711
person.identifier.orcid0000-0002-5240-6702
person.identifier.orcid0000-0002-8314-0695
person.identifier.orcid0000-0003-3561-5999
person.identifier.orcid0000-0002-5447-0409
person.identifier.orcid0000-0003-0633-8937
person.identifier.ridC-1150-2009
person.identifier.scopus-author-id55837277500
person.identifier.scopus-author-id7202364148
person.identifier.scopus-author-id7201639528
person.identifier.scopus-author-id7102859165
project.funder.identifierhttp://doi.org/10.13039/501100001871
project.funder.identifierhttp://doi.org/10.13039/501100001871
project.funder.nameFundação para a Ciência e a Tecnologia
project.funder.nameFundação para a Ciência e a Tecnologia
rcaap.rightsopenAccesspt_PT
rcaap.typearticlept_PT
relation.isAuthorOfPublicationf2a43899-c4c2-4b2b-b2a2-d85bdceca9e2
relation.isAuthorOfPublicationd7b05251-c408-44ba-8bbd-a6754722444b
relation.isAuthorOfPublication51557bd3-14c6-4246-b185-36f668c061dd
relation.isAuthorOfPublication2ed6018e-e361-4bb1-95a4-83e1c6f61c8d
relation.isAuthorOfPublicationf722bc06-dafc-4341-86f8-b405987804a8
relation.isAuthorOfPublication5fd0d024-b79a-44c9-9c6b-dbeeb54395ec
relation.isAuthorOfPublication.latestForDiscoveryf2a43899-c4c2-4b2b-b2a2-d85bdceca9e2
relation.isProjectOfPublication20517425-8535-4094-a902-f30133118ac0
relation.isProjectOfPublication7bd38fd6-8c86-4398-873a-63f9783aa196
relation.isProjectOfPublication.latestForDiscovery20517425-8535-4094-a902-f30133118ac0

Files

Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
Surface&CoatingsTechnology_2018-InPress.pdf
Size:
99.01 KB
Format:
Adobe Portable Document Format
Download
License bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
1.71 KB
Format:
Item-specific license agreed upon to submission
Description:
Download

Collections

ME - Artigos em revistas internacionais