A carregar...
Publicação
Production, preparation and characterization of microalgae-based biopolymer as a potential bioactive film
| Nome: | Descrição: | Tamanho: | Formato: | |
|---|---|---|---|---|
| 1.24 MB | Adobe PDF |
Orientador(es)
Resumo(s)
ABSTRACT: Six microalgae strains were screened according to their biomass productivity and polymer synthesis, showing biomass productivity between 0.14 and 0.68 g/(L center dot d) for a 21-day growth period. Extracellular biopolymers from the spent culture media of Nostoc sp. (No), Synechocystis sp. (Sy), and Porphyridium purpureum (Pp) was obtained, and the yields of the clean biopolymer were 323, 204, and 83 mg/L, respectively. The crude biopolymer was cleaned up using a solid-phase extraction technique. The emulsification index E-24 values for the clean biopolymer were 77.5%, 68.8%, and 73.3% at 0.323, 0.083, and 0.204 mg/mL, respectively. The clean biopolymer of the No strain showed the highest fungal growth inhibition against Fusarium verticillioides (70.2%) and Fusarium sp. (61.4%) at 2.24 mg/mL. In general, transparent and flexible biofilms were prepared using biopolymers of No and Pp. The microstructural analysis revealed the presence of pores and cracks in the biofilms, and the average roughness Ra values are 68.6 and 86.4 nm for No and Pp, respectively, and the root mean square roughness Rq values are 86.2 and 107.2 nm for No and Pp, respectively.
Descrição
Palavras-chave
Microalgae Biofilms Polysaccharides
Contexto Educativo
Citação
Morales-Jimenez, M... [et.al.] - Production, preparation and characterization of microalgae-based biopolymer as a potential bioactive film. In: Coatings, 2020, Vol. 10 (2), article nº 120
Editora
MDPI