ENERGIA
Permanent URI for this community
Browse
Browsing ENERGIA by Field of Science and Technology (FOS) "Engenharia e Tecnologia::Engenharia Química"
Now showing 1 - 10 of 17
Results Per Page
Sort Options
- Benchmarking commercially available value-added fractions with potential for production via microalgae-based biorefineries: is it worth it?Publication . Ferreira, Flávio; Reis, Alberto; Ortigueira, Joana; Lopes, TiagoABSTRACT: The urgent need to mitigate climate change requires finding sustainable and efficient alternatives to fossil fuel-based materials. Biosequestration by microalgae has been suggested as a potential method for climate change mitigation due to its environmentally friendly nature and ability to produce high-value compounds. However, the large-scale application of microalgal biorefineries faces significant challenges, particularly in the harvest and processing stages, which are often costly and energy-intensive. This study aims to benchmark value-added fractions that can be produced via microalgae-based biorefineries against their commercially available counterparts. A systematic review was conducted using the Web of Science™ database to identify current commercial sources of proteins, lipids, polyunsaturated fatty acids and pigments, this study identified key sectors and applications for each fraction, as well as potential market competitors. The results highlight substantial cost differences across production systems, with traditional agricultural sources demonstrating lower CAPEX but greater environmental challenges. Meanwhile, microalgal systems, although associated with higher CAPEX, offer advantages such as reduced land and water dependency, potentially leading to long-term economic resilience and environmental sustainability. By pinpointing research trends, key sectors and optimization opportunities, this work offers valuable insights into the profitability and competitiveness of microalgal systems, providing a benchmark for future optimization efforts. The novelty of this research lies in its comprehensive comparison of microalgae-based and traditional production systems, establishing a clear benchmark for microalgal production and suggesting focus areas for enhancement.
- Biopolymers Derived from Forest Biomass for the Sustainable Textile IndustryPublication . Dias, J. C.; Marques, Susana; Branco, Pedro C.; Rodrigues, Thomas; Torres, Cristiana A.V.; Freitas, Filomena; Evtuguin, Dmitry; Silva, CarlaABSTRACT: In line with environmental awareness movements and social concerns, the textile industry is prioritizing sustainability in its strategic planning, product decisions, and brand initiatives. The use of non-biodegradable materials, obtained from non-renewable sources, contributes heavily to environmental pollution throughout the textile production chain. As sustainable alternatives, considerable efforts are being made to incorporate biodegradable biopolymers derived from residual biomass, with reasonable production costs, to replace or reduce the use of synthetic petrochemical-based polymers. However, the commercial deployment of these biopolymers is dependent on high biomass availability and a cost-effective supply. Residual forest biomass, with lignocellulosic composition and seasonably available at low cost, constitutes an attractive renewable resource that might be used as raw material. Thus, this review aims at carrying out a comprehensive analysis of the existing literature on the use of residual forest biomass as a source of new biomaterials for the textile industry, identifying current gaps or problems. Three specific biopolymers are considered: lignin that is recovered from forest biomass, and the bacterial biopolymers poly(hydroxyalkanoates) (PHAs) and bacterial cellulose (BC), which can be produced from sugar-rich hydrolysates derived from the polysaccharide fractions of forest biomass. Lignin, PHA, and BC can find use in textile applications, for example, to develop fibers or technical textiles, thus replacing the currently used synthetic materials. This approach will considerably contribute to improving the sustainability of the textile industry by reducing the amount of non-biodegradable materials upon disposal of textiles, reducing their environmental impact. Moreover, the integration of residual forest biomass as renewable raw material to produce advanced biomaterials for the textile industry is consistent with the principles of the circular economy and the bioeconomy and offers potential for the development of innovative materials for this industry.
- Bridging gaps in biorefineries: The unexplored role of social dimension in life cycle assessment researchPublication . Ortigueira, Joana; Lopes, TiagoABSTRACT: This review examines the disregarded role of social dimensions in Life Cycle Assessment (LCA) within biorefinery implementation, addressing the question: "How can the inclusion of social factors in LCA improve sustainability assessments, and what are the implications of the limited Social Life Cycle Assessment (S-LCA) studies in biorefineries?" A systematic literature review was conducted using Web of ScienceTM, focusing on studies that integrate social dimensions in LCA. Bibliometric analysis using the bibliometrix R-package and VOSviewer identified key trends, influential papers, and research gaps. Results revealed a significant gap in incorporating social dimensions into biorefinery LCA, with most studies focusing primarily on environmental and economic impacts. Limited attention is given to social aspects such as community well-being, labor rights, and social equity. Case studies that included social factors demonstrated a more comprehensive sustainability assessment, emphasizing the importance of stakeholder engagement and social acceptability in biorefinery projects. This review highlights the need for standardized social indicators and methodologies to integrate social dimensions effectively. The lack of S-LCA in biorefinery implementation reflects a critical gap in sustainability assessments. Addressing this requires developing a unified S-LCA methodology, fostering interdisciplinary collaboration, and encouraging stakeholder participation to ensure diverse perspectives are considered. Ultimately, incorporating social dimensions is essential for achieving a more balanced and comprehensive evaluation of biorefinery sustainability.
- Clean production of microalgae high-value lipid fraction: Influence of different pretreatments on chemical and cytotoxic profiles of Chlorella vulgaris supercritical extracts and life cycle assessmentPublication . Vladic, Jelena; Radman, Sanja; Jerkovic, Igor; Besu, Irina; Speranza, Lais Galileu; Hala, Ahmad Furqan; Kovacevic, Strahinja; Perreira, Hugo; Gouveia, LuisaABSTRACT: Microalgae have emerged as a promising natural resource rich in bioactive compounds. Health-beneficial properties of microalgae, coupled with advantageous characteristics such as high biomass productivity, adaptability, robustness, and carbon dioxide mitigation, position them as a viable solution for global sustainable food production. This study explored clean and environmentally friendly processes to enhance the recovery of lipid bioactive fractions. Microwave (MW), enzymatic (ENZ), and ultrasound (US) pretreatments were applied to improve environmentally friendly extraction of lipid-based components using supercritical CO2. The effects of these pretreatments on extraction yield, chemical profiles, and cytotoxic properties of Chlorella vulgaris (Cv) and smooth C. vulgaris (sCv) extracts were investigated. Additionally, a Life Cycle Assessment (LCA) was conducted to evaluate environmental impacts. MW pretreatment achieved the highest yield increases, from 2.58 times (Cv) to 3.15 times (sCv). UHPLC-ESI-HRMS analysis revealed shifts in the distribution of pigments and derivatives caused by pretreatments, with ENZ extracts showing the most pronounced changes: pigments increased from 9.24% (control Cv) to 40.92% (Cv) and from 12.52% (control sCv) to 71.12% (sCv). Cv extracts exhibited greater activity against MDA-MB-453 cells, while sCv extracts from US pretreatment demonstrated the strongest effect on HeLa cells. The LCA indicated reduced environmental impacts of the pretreatment-enhanced processes up to 65% compared to the control. A scenario analysis was presented to show further possible impact reduction by recirculating the CO2 solvent and substituting the energy source. These findings provide valuable insights into sustainable and scalable green processes for recovering microalgal bioactive components.
- Design optimisation of five pilot-scale two-stage vertical flow-constructed wetlands for piggery wastewater treatmentPublication . Karan, N.; Gogoi, Jayanta; Ganguly, Anasuya; Brito, António; Marques dos Santos, C.; de Oliveira Corrêa, Diego; Gouveia, Luisa; Mutnuri, SrikanthABSTRACT: With growing pig farming, sustainable piggery wastewater treatment methods are essential for environmental protection. This study evaluated five pilot-scale two-stage vertical flow-constructed wetlands (VFCWs) with varying configurations of aeration, plantation, and saturation zones. Three VFCW configurations (1VFCW, 2VFCW, and 3VFCW) were unsaturated, while 4VFCW and 5VFCW were saturated in the second stage (up to 60 and 90 cm, respectively). The 5VFCW featured a stacked configuration with no space between its two stages. Passive aeration was selectively applied in 2VFCW, 3VFCW, 4VFCW, and 5VFCW, while plants were present in most configurations except the control. Saturated 4VFCW achieved the highest removal efficiency for TN (77.03 ± 16.24%) and NO3− (46.06 ± 45.96%), while the stacked 5VFCW showed the highest removal for chemical oxygen demand (COD) (94.17 ± 4.85%) and Total ammoniacal nitrogen (TOC) (86.35 ± 6.78%). Unsaturated 1VFCW excelled in TAN removal (98.89 ± 0.33%), and the control system (C) showed the highest removal efficiency for PO43− (90.38 ± 6.52%) and TOC (87.52 ± 9.83%). Overall, 4VFCW emerged as the most balanced and effective system, supported by an optimal combination of aerobic and anaerobic conditions that facilitated sequential nitrification and denitrification, along with an extended hydraulic retention time due to saturation.
- Energy potential of elephant grass broth as biomass for biogas productionPublication . da Silva, Guilherme Henrique; Renato, Natalia dos Santos; Coelho, Felipe Ferreira; Donato, Thiago Paiva; Otenio, Marcelo; Machado, Juarez; Delgado dos Reis, Alberto JoséABSTRACT: The growing demand for clean energy has highlighted plant biomass as a valuable alternative, supporting sustainable development goals. Elephant grass (EG) is a promising feedstock due to its adaptability to diverse soils and climates, high dry matter production, and substantial energy yield. This study aimed to evaluate and characterize six selected EG genotypes (BRS Capia & ccedil;u, T_23.1, T_23.2, T_41.2, T_47.1, and T_51.5) based on their broth productivity and energy yield. Analysis of the broth's yield and physicochemical properties revealed that the by-product extracted from the biomass had a high residual energy value. Additionally, extracting the broth reduces the grass's biomass moisture content, enhancing its calorific value and improving the bagasse quality for combustion in boilers, thus optimizing energy production. This study demonstrates that the promising EG genotypes T_47.1, T_41.2, and T_23.1 presented relevant energy values ranging from 4248.12 to 4304.06 kcal kg- 1 of bagasse and thus are suitable for energy production through direct combustion. The extracted broth is a valuable residual energy source that can be utilized industrially after anaerobic digestion. Future research should focus on the environmental and economic effectiveness of EG broth as an energy source from waste and its potential for biogas production.
- Enhancing Corrosion Resistance of Al-Mg Alloys through Biomineralization [Resumo]Publication . Marques, Maria João; Fori, Benoit; Mercier, Dimitri; Seyeux, Antoine; Zanna, Sandrine; Marcus, Philippe; BASSEGUY, RegineABSTRACT: In recent decades, new emerging microbiological technologies have been studied, based on the recognition that microorganisms can inhibit corrosion by different mechanisms, the so-called MICI (microbiologically influenced corrosion inhibition), opening up different lines of research. In this context, biomineralization has been attracting the attention of researchers, with an increasing number of studies showing that different types of mineralized layers formed on metal surfaces can reduce the risk of corrosion.
- Exploring Marine Biomineralization on the Al-Mg Alloy as a Natural Process for In Situ LDH Growth to Improve Corrosion ResistancePublication . Marques, Maria João; Mercier, Dimitri; Seyeux, Antoine; Zanna, Sandrine; Tenailleau, Christophe; Duployer, Benjamin; Jeannin, Marc; Marcus, Philippe; Basséguy; BASSEGUY, RegineABSTRACT: This study provides a detailed characterization of the AA5083 aluminum alloy, surface, and interface over 6 months of immersion in seawater, employing techniques such as SEM/EDX, GIXRD, mu-Raman and XPS. The purpose was to evaluate the evolution of the biomineralization process that occurs on the Al-Mg alloy. By investigating the specific conditions that favor the in situ growth of layered double hydroxide (LDH) during seawater immersion as a result of biomineralization, this research provides insights into marine biomineralization, highlighting its potential as an innovative and sustainable strategy for corrosion protection.
- La biominéralisation comme bioinspiration pour le développement de solutions anti-corrosion [Resumo]Publication . BASSEGUY, Regine; Marques, Maria JoãoRÉSUMÉ: Dans le domaine de la corrosion, la nature se révèle être une source d’inspiration pour développer de nouveaux concepts de protection verts. En effet, il est largement reconnu que les micro-organismes sont capables non seulement d’accélérer la orrosion mais ils peuvent également l'inhiber et/ou protéger les matériaux qu’ils colonisent [1]. Ce constat a ainsi conduit à proposer des stratégies à base microbienne pour l'inhibition de la corrosion des métaux. En particulier, le processus de biominéralisation à la surface des matériaux, tels que les pierres, le béton et divers métaux, a récemment été considéré comme une nouvelle approche respectueuse de l'environnement pour produire des couches protectrices [2-3]. Jusqu’à peu, la majorité des publications concernaient les aciers, matériaux historiquement utilisés dans les infrastructures. Au cours des dernières années, de nouveaux matériaux tels que les alliages d'aluminium, sont apparus sur le marché comme des alternatives possibles. Dans le cas spécifique de l'alliage Al-Mg, souvent utilisé dans les applications marines, peu d'études ont évalué l'influence de la biominéralisation sur la corrosion [4-6]. L'objectif de cette présentation est de montrer, à travers deux études de cas, comment la précipitation minérale influencée par l’activité microbienne sur les matériaux métalliques peut être envisagée comme une nouvelle approche pour le développement de solutions anti-corrosion.
- New Insights on Gordonia alkanivorans Strain 1B Surface-Active Biomolecules: Gordofactin PropertiesPublication . Tavares, João; Paixão, Susana M.; Silva, Tiago; Alves, LuísABSTRACT: Biosurfactants/bioemulsifiers (BSs/BEs) can be defined as surface-active biomolecules produced by microorganisms with a broad range of applications. In recent years, due to their unique properties like biodegradability, specificity, low toxicity, and relative ease of preparation, these biomolecules have attracted wide interest as an eco-friendly alternative for several industrial sectors, escalating global microbial BS/BE market growth. Recently, Gordonia alkanivorans strain 1B, a bacterium with significant biotechnological potential, well known for its biodesulfurizing properties, carotenoid production, and broad catabolic range, was described as a BS/BE producer. This study focuses on the characterization of the properties of the lipoglycopeptide BSs/BEs produced by strain 1B, henceforth referred to as gordofactin, to better understand its potential and future applications. Strain 1B was cultivated in a chemostat using fructose as a carbon source to stimulate gordofactin production, and different purification methods were tested. The most purified sample, designated as extracted gordofactin, after lyophilization, presented a specific emulsifying activity of 9.5 U/mg and a critical micelle concentration of 13.5 mg/L. FT-IR analysis revealed the presence of basic hydroxyl, carboxyl, ether, amine/amide functional groups, and alkyl aliphatic chains, which is consistent with its lipoglycopeptide nature (60% lipids, 19.6% carbohydrates, and 9% proteins). Gordofactin displayed remarkable stability and retained emulsifying activity across a broad range of temperatures (30 degrees C to 80 degrees C) and pH (pH 3-12). Moreover, a significant tolerance of gordofactin emulsifying activity (EA) to a wide range of NaCl concentrations (1 to 100 g/L) was demonstrated. Although with a great loss of EA in the presence of NaCl concentrations above 2.5%, gordofactin could still tolerate up to 100 g/L NaCl, maintaining about 16% of its initial EA for up to 7 days. Furthermore, gordofactin exhibited growth inhibition against both Gram-positive and Gram-negative bacteria, and it demonstrated concentration-dependent free radical scavenging activity for 2,2-diphenyl-1-picrylhydrazyl (IC50 approximate to 1471 mg/L). These promising features emphasize the robustness and potential of gordofactin as an eco-friendly BS/BE alternative to conventional surfactants/emulsifiers for different industrial applications.