UB - Artigos em revistas internacionais
Permanent URI for this collection
Browse
Browsing UB - Artigos em revistas internacionais by Sustainable Development Goals (SDG) "07:Energias Renováveis e Acessíveis"
Now showing 1 - 8 of 8
Results Per Page
Sort Options
- Benchmarking commercially available value-added fractions with potential for production via microalgae-based biorefineries: is it worth it?Publication . Ferreira, Flávio; Reis, Alberto; Ortigueira, Joana; Lopes, TiagoABSTRACT: The urgent need to mitigate climate change requires finding sustainable and efficient alternatives to fossil fuel-based materials. Biosequestration by microalgae has been suggested as a potential method for climate change mitigation due to its environmentally friendly nature and ability to produce high-value compounds. However, the large-scale application of microalgal biorefineries faces significant challenges, particularly in the harvest and processing stages, which are often costly and energy-intensive. This study aims to benchmark value-added fractions that can be produced via microalgae-based biorefineries against their commercially available counterparts. A systematic review was conducted using the Web of Science™ database to identify current commercial sources of proteins, lipids, polyunsaturated fatty acids and pigments, this study identified key sectors and applications for each fraction, as well as potential market competitors. The results highlight substantial cost differences across production systems, with traditional agricultural sources demonstrating lower CAPEX but greater environmental challenges. Meanwhile, microalgal systems, although associated with higher CAPEX, offer advantages such as reduced land and water dependency, potentially leading to long-term economic resilience and environmental sustainability. By pinpointing research trends, key sectors and optimization opportunities, this work offers valuable insights into the profitability and competitiveness of microalgal systems, providing a benchmark for future optimization efforts. The novelty of this research lies in its comprehensive comparison of microalgae-based and traditional production systems, establishing a clear benchmark for microalgal production and suggesting focus areas for enhancement.
- Bridging gaps in biorefineries: The unexplored role of social dimension in life cycle assessment researchPublication . Ortigueira, Joana; Lopes, TiagoABSTRACT: This review examines the disregarded role of social dimensions in Life Cycle Assessment (LCA) within biorefinery implementation, addressing the question: "How can the inclusion of social factors in LCA improve sustainability assessments, and what are the implications of the limited Social Life Cycle Assessment (S-LCA) studies in biorefineries?" A systematic literature review was conducted using Web of ScienceTM, focusing on studies that integrate social dimensions in LCA. Bibliometric analysis using the bibliometrix R-package and VOSviewer identified key trends, influential papers, and research gaps. Results revealed a significant gap in incorporating social dimensions into biorefinery LCA, with most studies focusing primarily on environmental and economic impacts. Limited attention is given to social aspects such as community well-being, labor rights, and social equity. Case studies that included social factors demonstrated a more comprehensive sustainability assessment, emphasizing the importance of stakeholder engagement and social acceptability in biorefinery projects. This review highlights the need for standardized social indicators and methodologies to integrate social dimensions effectively. The lack of S-LCA in biorefinery implementation reflects a critical gap in sustainability assessments. Addressing this requires developing a unified S-LCA methodology, fostering interdisciplinary collaboration, and encouraging stakeholder participation to ensure diverse perspectives are considered. Ultimately, incorporating social dimensions is essential for achieving a more balanced and comprehensive evaluation of biorefinery sustainability.
- Energy potential of elephant grass broth as biomass for biogas productionPublication . da Silva, Guilherme Henrique; Renato, Natalia dos Santos; Coelho, Felipe Ferreira; Donato, Thiago Paiva; Otenio, Marcelo; Machado, Juarez; Delgado dos Reis, Alberto JoséABSTRACT: The growing demand for clean energy has highlighted plant biomass as a valuable alternative, supporting sustainable development goals. Elephant grass (EG) is a promising feedstock due to its adaptability to diverse soils and climates, high dry matter production, and substantial energy yield. This study aimed to evaluate and characterize six selected EG genotypes (BRS Capia & ccedil;u, T_23.1, T_23.2, T_41.2, T_47.1, and T_51.5) based on their broth productivity and energy yield. Analysis of the broth's yield and physicochemical properties revealed that the by-product extracted from the biomass had a high residual energy value. Additionally, extracting the broth reduces the grass's biomass moisture content, enhancing its calorific value and improving the bagasse quality for combustion in boilers, thus optimizing energy production. This study demonstrates that the promising EG genotypes T_47.1, T_41.2, and T_23.1 presented relevant energy values ranging from 4248.12 to 4304.06 kcal kg- 1 of bagasse and thus are suitable for energy production through direct combustion. The extracted broth is a valuable residual energy source that can be utilized industrially after anaerobic digestion. Future research should focus on the environmental and economic effectiveness of EG broth as an energy source from waste and its potential for biogas production.
- Influence of Inhibitors Generated in Lignocellulosic Hydrolysates from Group of Acids on the Growth of Strains TG1 and Tuner of Escherichia coliPublication . Gaspar, Suelen S.; Alves Ferreira Caturra, Júnia Aparecida; Moniz, Patricia; Silva-Fernandes, Talita; Silvestre, Adriana I. R; Torrado, Ivone; Pesce, Gaetano R.; Carvalheiro, Florbela; Duarte, Luís; Fernandes, Maria da ConceiçãoABSTRACT: Concerns over fossil fuels are of increasing interest in biorefineries that utilize lignocellulosic residues. Besides sugars, inhibitors are formed during biomass pretreatment, including acetic acid (AI) and formic acid (FI), which can hinder microbial fermentation. The TG1 and Tuner strains of Escherichia coli were subjected to various acid concentrations. Samples were taken during fermentation to monitor growth, sugar consumption, biomass yield, and product yield. With increasing AI, the TG1 strain maintained stable growth (0.102 1/h), while xylose consumption decreased, and product formation improved, making it better suited for high-acetic-acid industrial applications. In contrast, the Tuner strain performed better under low-inhibitor conditions but suffered metabolic inhibition at high AI levels, compensating by increasing lactic acid production-an adaptation absent in TG1. However, Tuner showed greater resistance to formic acid stress, sustaining higher growth and ethanol production, whereas TG1 experienced a greater metabolic decline but maintained stable acetic acid output. Both strains experienced inhibition in formic acid metabolism, but TG1 had a higher yield despite its lower overall robustness in formic acid conditions. The use of TG1 for value-added compounds such as ethanol or formic acid may help to avoid the use of chemicals that eliminate acetic acid. Tuner could be used for lactic acid production, especially in hydrolysates with under moderate concentration.
- Optimizing bacterial nanocellulose production from eucalyptus bark: A circular approach to wastewater management and resource recoveryPublication . Rodrigues, Ana Cristina; Martins, Daniela; Duarte, Maria Salomé; Marques, Susana; Gama, Miguel; Dourado, Fernando; Carvalho, Ricardo; Cavaleiro, AnaABSTRACT: The production cost of bacterial nanocellulose (BNC) is a major limitation to its widespread use. However, this limitation can be addressed by using alternative low-cost substrates and high-yield strains. Agro-industrial wastederived substrates offer a cost-effective and sustainable solution, but their high organic load often requires additional downstream wastewater treatments. Here, we optimized static BNC production using eucalyptus bark hydrolysate (EBH) as a low-cost carbon source and proposed a circular approach for wastewater management. Optimization was performed using response surface methodology - central composite design. The optimized EBH medium yielded a 39.7-fold increase compared to standard medium, with a maximum BNC production of 8.29 f 0.21 g/L. Fermentation wastewater only (WaF) and combined with BNC washing streams (WaW) revealed high levels of organic matter, namely chemical oxygen demand (COD) of 159.0 f 2.0 and 41.1 f 0.3 g/L, and volatile solids (VS) of 99.5 f 0.9 and 26.3 f 0.2 g/L, respectively, requiring treatment before disposal. A sequential anaerobic-aerobic digestion was investigated for wastewater treatment and valorisation. Anaerobic digestion proved to be effective in treating the wastewater: methanization percentages over 87 % were achieved, and methane productions of 486 f 2 and 544 f 30 L/kg VS were obtained from WaF and WaW, respectively. Subsequent aerobic treatment was unsuccessful in further reducing COD levels (approximately 1.5 g/L). Notably, treated wastewater was recycled into the production process up to 45 % without affecting the BNC yield. This study provides valuable insights into the optimization of BNC production from lignocellulosic biomass and the management of wastewater streams, contributing to the development of a more sustainable and economically viable process.
- Production of sustainable aviation fuel precursors using the oleaginous yeast Rhodotorula toruloides PYCC 5615 cultivated on eucalyptus bark hydrolysatePublication . Saraiva Lopes da Silva, Maria Teresa; Dutra, Francisca; Gomes, Miguel; Costa, Paula; Paradela, Filipe; Ferreira, Frederico Castelo; Torres Faria, Nuno Ricardo; Mugica, Paula; Pinheiro, Helena M.; Sá-Correia, Isabel; Gírio, Francisco; Marques, SusanaABSTRACT: Sustainable aviation fuels (SAF) obtained from renewable sources of carbon can reduce carbon dioxide emissions and contribute for mitigating climate changes. In the present study, the yeast Rhodotorula toruloides PYCC 5615 was found to be highly promising for the bioconversion of eucalyptus bark hydrolysate and the accumulation of intracellular lipids which were further thermochemically processed to bioenergy intermediaries for SAF production. Two growth medium formulations were tested. Eucalyptus bark hydrolysate, obtained by steam explosion followed by enzymatic hydrolysis, was supplemented with yeast nitrogen base medium or with corn steep liquor and mineral medium. The latter produced the highest fatty acid content and productivity (30 % w/w and 0.11 g/ (L.h) respectively). Thereafter, the whole yeast biomass (WB) and the de-oiled biomass (DOB), obtained after lipid extraction, were processed into Bio-crude using a hydrothermal liquefaction (HTL) reactor, with a yield of approximate to 40 % (w/w). The two obtained Bio-crude fractions and the yeast lipids fraction (YL) were further upgraded by hydrodeoxygenation (HDO), to remove oxygen atoms and increase the hydrocarbon content, resulting in a Bio-crude composed of linear long-chain fatty acids suitable for processing to SAF. The best Bio-crude characteristics was observed for WB and YL fractions, with 34.8 % and 40.7 % of hydrocarbons, respectively. Both WB and YL hydrocarbons were composed of C15-C17 compounds. These results demonstrate the potential of an integrated process based on microbial oils from R. toruloides PYCC 5615 to produce SAF precursors from Eucalyptus bark residues, contributing for the sustainable jetfuel bioproduction process.
- Recovery of Nd3+ and Dy3+ from E-Waste Using Adsorbents from Spent Tyre Rubbers: Batch and Column Dynamic AssaysPublication . Nogueira, Miguel; Matos, Inês; Bernardo, Maria; Pinto, Filomena; Fonseca, Isabel Maria; Lapa, NunoABSTRACT: This paper investigates the use of spent tyre rubber as a precursor for synthesising adsorbents to recover rare earth elements. Through pyrolysis and CO2 activation, tyre rubber is converted into porous carbonaceous materials with surface properties suited for rare earth element adsorption. The study also examines the efficiency of leaching rare earth elements from NdFeB magnets using optimised acid leaching methods, providing insights into recovery processes. The adsorption capacity of the materials was assessed through batch adsorption assays targeting neodymium (Nd3+) and dysprosium (Dy3+) ions. Results highlight the superior performance of activated carbon derived from tyre rubber following CO2 activation, with the best-performing adsorbent achieving maximum uptake capacities of 24.7 mg.g(-1) for Nd3+ and 34.4 mg.g(-1) for Dy3+. Column studies revealed efficient adsorption of Nd3+ and Dy3+ from synthetic and real magnet leachates with a maximum uptake capacity of 1.36 mg.g(-1) for Nd3+ in real leachates and breakthrough times of 25 min. Bi-component assays showed no adverse effects when both ions were present, supporting their potential for simultaneous recovery. Furthermore, the adsorbents effectively recovered rare earth elements from e-waste magnet leachates, demonstrating practical applicability. This research underscores the potential of tyre rubber-derived adsorbents to enhance sustainability in critical raw material supply chains. By repurposing waste tyre rubber, these materials offer a sustainable solution for rare earth recovery, addressing resource scarcity while aligning with circular economy principles by diverting waste from landfills and creating value-added products.
- Sustainability assessment of collagen extraction from fish skins: A comparative life cycle assessment of conventional and NADES-enhanced processesPublication . Miguel P. Batista; Fernández, Naiara; Gaspar, Frédéric B.; Bronze, MR; Duarte, Ana Rita C.; Ortigueira, Joana; Lopes, TiagoABSTRACT: Collagen from blue shark skins offers a promising solution to utilize fishery by-products, reducing waste and improving resource efficiency. This study develops green chemistry-based extraction processes to minimize reliance on traditional chemical methods and lower environmental impacts, prioritizing sustainability and circularity. Two methods for collagen extraction are compared: a conventional alkaline-acid process and an innovative approach using natural deep eutectic solvents (NADES). Process simulations were conducted using SuperPro Designer software for the annual production of 500 kg of pure extracted collagen, followed by life cycle assessment (LCA) using SimaPro software and the Ecoinvent database, applying the Environmental Footprint (EF) method. For 1 kg of pure marine collagen from fish skin residues, defined as the Functional Unit, the conventional approach yielded a single-score impact of 48.1 mPt, while the NADES method achieved 41.5 mPt. Subsystem analysis reveals that, in the conventional method, the extraction and purification stages account for most of the environmental impact (43 % and 45 %, respectively). In contrast, the NADES method attributed 94 % of its total environmental impact to extraction stage, primarily due to NADES component production (citric acid, xylitol). Uncertainty analysis suggests that conclusions regarding impact reduction should be drawn with caution due to the environmental impact variability of considered inputs. Nevertheless, the mathematical model underscores the potential of the NADES method to reduce the environmental impact and promote more sustainable bioprocessing. This work offers valuable insights into the life cycle assessment of large-scale bioprocesses using green chemistry, providing a tool for optimization and environmental impact screening.