UB - Artigos em revistas internacionais
Permanent URI for this collection
Browse
Browsing UB - Artigos em revistas internacionais by Subject "Activated carbons"
Now showing 1 - 5 of 5
Results Per Page
Sort Options
- Chars from gasification of coal and pine activated with K2CO3: Acetaminophen and caffeine adsorption from aqueous solutionsPublication . Galhetas, M.; Mestre, A. S.; Pinto, Moisés L.; Gulyurtlu, Ibrahim; Lopes, Helena; Carvalho, A. P.The high carbon contents and low toxicity levels of chars from coal and pine gasification provide an incentive to consider their use as precursors of porous carbons obtained by chemical activation with K2CO3. Given the chars characteristics, previous demineralization and thermal treatments were made, but no improvement on the solids properties was observed. The highest porosity development was obtained with the biomass derived char (Pi). This char sample produced porous materials with preparation yields near 50% along with high porosity development (ABET 1500 m2 g1). For calcinations at 800 C, the control of the experimental conditions allowed the preparation of samples with a micropore system formed almost exclusively by larger micropores. A mesopore network was developed only for samples calcined at 900 C. Kinetic and equilibrium acetaminophen and caffeine adsorption data, showed that the processes obey to a pseudo-second order kinetic equation and to the Langmuir model, respectively. The results of sample Pi/1:3/800/2 outperformed those of the commercial carbons. Acetaminophen adsorption process was ruled by the micropore size distribution of the carbons. The caffeine monolayer capacities suggest a very efficient packing of this molecule in samples presenting monomodal micropore size distribution. The surface chemistry seems to be the determinant factor that controls the affinity of caffeine towards the carbons.
- Cr(III) dynamic removal in a fixed-bed column by using a co-gasification charPublication . Dias, Diogo; Bernardo, Maria; Pinto, Filomena; Fonseca, Isabel Maria; Lapa, NunoABSTRACT: A char (GC) obtained from the co-gasification of rice husk and polyethylene was used in a fixed-bed column with continuous flow for Cr(III) removal assays from synthetic and industrial wastewaters. For comparison purposes, a commercial activated carbon (CAC) was also used. The best experimental conditions in the continuous removal assays were the following ones: Cr(III) inflow concentration = 5 mg L-1, feed flow rate = 3 mL min(-1), mass of adsorbent in the column = 0.8 g, and inflow temperature = 50 degrees C. Under these conditions, the highest uptake capacities were 1.60 and 2.14 mg g(-1) in the synthetic solution, and 3.25 and 7.83 mg g(-1) in the industrial wastewater, for GC and CAC, respectively. These results are different from those obtained under batch conditions in which GC performed better than CAC. Cr(III) removal by both adsorbents occurred due to precipitation, but CAC presented a slightly higher amount of Cr(III) removed due to its highest porosity. The regeneration of GC and CAC was also studied, but both adsorbents showed no capacity to be used in more than one cycle. This study highlighted the importance of studying Cr(III) removal under continuous conditions, as the removal mechanisms may be completely different from the batch assays, affecting the adsorbents' performance.
- Highly efficient porous carbons for the removal of W(VI) oxyanion from wastewatersPublication . Dias, Diogo; Don, Davide; Jandosov, Jakpar; Bernardo, Maria; Pinto, Filomena; Fonseca, Isabel Maria; Sanches, André; Caetano, P. S.; Lyubchyk, Svitlana; Lapa, NunoABSTRACT: Pyrolysis chars derived from rice wastes were chemically activated and used in W(VI) oxyanion adsorption assays in synthetic and mining wastewaters. For comparison purposes, a commercial activated carbon (CAC) was also used. Different experimental conditions were tested in the adsorption assays: solid/liquid ratio (S/L), initial pH, contact time, and initial W concentration. The porous carbon P2C+KOH presented the overall best performance in both media, due to its high surface area (2610 m2 g-1), mesopore volume (1.14 cm3 g-1), and neutral pHpzc (6.92). In the synthetic wastewater, the highest uptake capacity of P2C+KOH (854 mg g-1) was found in the assays with an S/L 0.1 g L-1, an initial pH 2, and an initial W concentration of 150 mg L-1, for 24 h. This value was almost 8 times higher than the one obtained for CAC (113 mg g-1). In the mining wastewater, P2C+KOH showed an even higher uptake capacity (1561 mg g-1) in the assay with the same experimental conditions, which was almost 3 times higher than for CAC (561 mg g-1). These results suggest that P2C+KOH seems to be an efficient alternative to CAC in the W(VI) adsorption from liquid effluents.
- Opportunities and Constraints of the Adsorption of Rare Earth Elements onto Pyrolytic Carbon-Based Materials: A Mini-ReviewPublication . Nogueira, Miguel; Bernardo, Maria; Ventura, Márcia; Matos, Inês; Pinto, Filomena; Lapa, NunoABSTRACT: Rare earth elements (REEs), comprising seventeen metallic elements, including lanthanides, scandium, and yttrium, are indispensable for modern technological industries due to their unique properties. However, their supply is critically risky for the European Union, with 95% of global production concentrated in China, Brazil, Vietnam, Russia, India, and Australia. This mini-review examines the adsorption of REEs onto pyrolytic carbon-based materials as a sustainable recovery method from secondary raw materials. The review covers different types of carbon-based adsorbents used in several research works, such as activated carbon, chars, and biochar, and discusses their adsorption mechanisms and influencing factors. Comparative analyses of adsorption capacities highlight the significance of surface area and functionalization in enhancing adsorption efficiency. Despite promising results, the variability in adsorption performance due to experimental conditions and the scarcity of real-world application studies are noticed. This review underscores the need for further research using real e-waste leachates to validate the practical applicability of pyrolytic carbon-based adsorbents for REEs' recovery, aiming for an economically and environmentally sustainable solution.
- The influence of the textural properties of activated carbons on acetaminophen adsorption at different temperaturesPublication . Galhetas, M.; Andrade, Marta A.; Mestre, A. S.; Kangni-foli, Ekoé; Brito, Maria J. Villa de; Pinto, Moisés L.; Lopes, Helena; Carvalho, A. P.The influence of temperature (20–40 °C) on the acetaminophen adsorption onto activated carbons with different textures was studied. Different temperature dependences, not explained by kinetic effects, were observed for carbons with different micropore size distribution patterns: adsorption capacity increased for pine gasification residues (Pi-fa) derived carbons and decreased for sisal based materials. No significant variation was seen for carbon CP. The species identified by 1H NMR spectroscopy on the back-extraction solution proved that during the adsorption process exist the conditions required to promote the formation of acetaminophen oligomers which have constrained access to the narrow microporosity. The rotation energy of the dihedral angle between monomers (estimated by electronic DFT methods) showed that conformations in the planar form are less stable than the non-planar conformation (energy barrier of 70 and 23 kJ mol-1), but have critical dimensions similar to the monomer and can access most of the micropore volume. The enthalpy change of the overall process showed that the energy gain of the system (endothermic) for Pi-fa samples (˜40 kJ mol-1) was enough to allow a change in the dimer, or even a larger oligomer, conformation to the planar form. This will permit adsorption in the narrow micropores, thus explaining the uptake increase with temperature. Non-continuous micropore size distributions centered at pore widths close to the critical dimensions of the planar form seem to be crucial for a positive evolution of the adsorption capacity with temperature.